In the complete deep‑processing workflow of nonwovens, the slitting process directly determines finished product dimensional accuracy, cut edge quality, and winding formation. It is a critical link for controlling product yield and reducing material waste. In actual production, a nonwoven slitting machine operates continuously at high speed for extended periods, making it vulnerable to multiple factors such as blade wear, tension fluctuations, material impurities, and improper parameter settings. As a result, common faults frequently occur: ragged cut edges, web breakage with wrinkling, uneven winding, and abnormal machine noise. If these minor issues are not resolved quickly and accurately, they will not only slow down production rhythm and increase raw material waste, but may also accelerate equipment wear and delay order delivery.
This article focuses on real‑world workshop scenarios, summarizing four major categories of common faults for the nonwoven slitting machine (and slitting machine in general). Each fault is paired with a quick root‑cause diagnosis and practical, easy‑to‑implement solutions. The goal is to help front‑line maintenance and operating personnel troubleshoot efficiently, resume production swiftly, stabilize output quality, and improve overall productivity.

1. Fault Diagnosis and Solutions for Nonwoven Slitting Machine
Below are four common operational issues encountered on a nonwoven slitting machine and their quick solutions.
a. Uneven slitting width
Causes: Inaccurate blade installation, blade wear, or uneven material tension.
Solutions: Re‑adjust blade positions, replace worn blades, and inspect/adjust the tension control system.
b. Unwinding misalignment
Causes: Improper unwinding tension, incorrectly mounted unwinding mandrel, or pre‑existing wrinkles in the material.
Solutions: Adjust unwinding tension, re‑mount the unwinding mandrel, and check raw material quality.
c. Excessive machine running noise
Causes: Worn transmission parts, lack of lubrication, or foreign objects inside the machine.
Solutions: Inspect and replace worn transmission components, add lubricating oil, and remove any foreign matter from the machine interior.
d. Machine fails to start / touchscreen alarm
Solution: First, check whether the counter (upper left corner) has been reset to zero. When an alarm appears on the touchscreen, open the alarm screen to identify the fault code and handle it according to the cause displayed.
These troubleshooting tips help operators keep their slitting machine in optimal condition, reducing downtime and improving cut quality.
2. How to Maintain a Nonwoven Slitting Machine
Proper maintenance of a nonwoven slitting machine (or any slitting machine) extends its service life, ensures cut quality, and reduces unexpected downtime. Follow this two‑level maintenance plan.
Daily Maintenance
- After each use, clean dust, paper scraps, film fragments, and other debris from the machine surface to keep it tidy.
- Inspect blade wear. Replace any severely worn blades immediately to maintain slitting quality.
- Check belts, chains, and other transmission components for looseness. Tighten them as needed.
Periodic Maintenance
Depending on usage frequency, perform a comprehensive inspection and servicing monthly or quarterly:
- Lubricate all grease points and replace lubricating oil.
- Inspect the electrical system for damaged wires, plugs, switches, etc., ensuring electrical safety.
- Examine mechanical parts such as rollers and bearings for wear. Repair or replace damaged components promptly.
Following this maintenance routine keeps your nonwoven slitting machine running efficiently, producing clean cuts and consistent winding while minimizing costly breakdowns.
3. FAQ
Q1: How often should slitter blades be replaced?
A: There is no fixed replacement interval for nonwoven slitting machine blades. Under normal conditions, expect 80–300 hours or 30,000–60,000 linear meters. Actual life depends on material type, abrasiveness, operating conditions, and maintenance.
Q2: How to handle cutting of highly elastic materials?
A: Three adjustments help:
- Reduce line speed by 30%;
- Pre‑cool the material (add a cooling roller);
- Use specially coated blades.
Q3: Is a used slitting machine worth buying?
A: Evaluate carefully. 60% of faults in used machines come from hidden wear.
Recommendations:
- Request a running test;
- Check electrical system upgrade records;
- Budget 15–20% of the price for repairs.
Jinxin offers used equipment assessment services.
Q4: How to train operators quickly?
A: Jinxin provides installation and hands‑on training, plus written & video operating guides for your slitting machine.
Q5: How to reduce energy consumption of a slitting machine?
A: Three key points:
- Optimize cutting speed for your material;
- Maintain the pneumatic system regularly (leaks can increase energy use by 15%);
- Upgrade to high‑efficiency motors (saving 20–30% energy).


